OM Tubes is manufacturer and exporter and supplier globally of  pipe fittings. Pipe fittings can be manufactured and supplied in Carbon Steel, Stainless Steel, and Nickel Based Alloys. Our pipe fittings are only of the highest quality and go through stringent in house checks for defects in quality and workmanship. Our pipe fittings are manufactured to guarantee a tight, leakproof fit, therefore the pipes we manufacture are used in a number of households as well as Oil refinery industries, Seawater cooling devices, Gas is scrubbing plants, Pulp and paper processing industries, Acetic, phosphoric and sulfuric acid processing plants, Research & development departments, etc.Our competitive pricing on stainless steel pipe fittings makes us one of the most economical distributors in the industry today. We also have a heat number traceability on all stainless steel pipe fittings which makes sure that is can be traced back to the mill at which it was procured. Our manufacturing is also at par with the ASIM, ASME, ANS & DIN standards. Hence, we add immense value to the steel industry by providing all types of pipe fittings and associated accessories.


Butt Weld Pipe Fittings

Socket Weld Pipe Fittings

Socket Weld Pipe Fittings

Fabricated Pipe Fittings

Heavy Walled Pipe Fittings

Branch Pipe Fittings

Investment Casting Pipe Fittings

Hygienic / Sanitary Pipe Fittings


Pipe Fittings are connections used to connect two pipes. The connection provides a firm bound to the pipe which ensures mechanical and structural strength to hold the equipment. It also ensures the free flow of liquid in the process. Pipe fittings are either welded to pipes or fitted using thread connections depending on the application and type. Steel Pipe fittings are fittings that connect to pipes in one of two ways, either by threads or by slip fit. Threaded pipes are pipes that screw together to connect, while slip fit pipes use sleeves that slip into one another. The pipe fittings manufactured by us are organized by male and female connectors such as:

  • Male threaded: In male threaded, the threads are exterior, they are made to screw into the inside of a larger diameter pipe end, which has internal threading.
  • Female threaded: In female threaded, the threads are interior, they are made to receive male threaded fittings.
  • Male slip fit: A male slip fit has no threads, it is made to slip into a slightly larger female sleeve.
  • Female slip fit: A female slip fit also has no threads, it is made to receive a male slip fit that is slightly narrower.

Pipe Fittings are of various types namely:

  • Butt Weld Fittings
  • Socket Weld Fittings
  • Outlets


Brief Description

Orders at OM Tubes guarantee fast delivery of the Inconel Pipe Fitting in the country. The main reason being we have an excellent warehousing and storage facilities for both finished and semi finished goods. They are made ready as per the urgent requirements of the customers. The Inconel Pipe Fitting are manufactured to sustain very high pressure and product warranty.

Applications Of Pipe Fittings

Pipe Fittings have a variety of applications in the following industries:

  • Oil & Gas
  • Pharmaceuticals
  • Paper Mills
  • Research & Development
  • Plumbing
  • Food & Sanitary

Grades Of Pipe Fittings

We manufacture and supply Pipe fittings in the following steel material:

  • Carbon Steel Pipe Fittings
  • Stainless Steel Pipe Fittings
  • Duplex Pipe Fittings
  • Super Duplex Pipe Fitting
  • Inconel Pipe Fittings
  • Hastelloy Pipe Fittings
  • Monel Pipe Fittings
  • Titanium Pipe Fittings
  • SS904L Pipe Fittings


We have a state of the art mill facilities, access which runs at a full capacity due to export order overload. We have 3 heavy punch machines for making seamless tees. We also have bend machines for elbows and equipment for reducer. We have facilities to make seamless pipe fittings up to 8” We can make welded pipe fittings up to 42”. We also have threads in NPT, BSPT & BSPP to make forged fittings. The dye of socket weld fitting is outsourced and machining and finishing is done in house. Added to that we have in house testing facilities like Spectro machine, PMI Machine, Mechanical test, Hardness Test, Ultrasonic Testing, Hydrostatic Testing, Pressure testing, and manual inspection of the gauge. Our product range also includes flanges and fasteners which are considered piping accessories for a pipeline set up.

The production process can be divided separately for different types of fittings:
Butt weld fittings : 

Butt weld fittings are produced using pipes as a primary raw material. The fittings are made into the desired shape and size using various machines and heat treatment if required. Followed by that the ends are subject to beveling using CNC Machining. That is followed by sandblasting for finishing of the fitting. Final process involves quality testing and marking.

Socket weld fittings& Olets: 

We primarily rely on outsourced services to manufacture socket weld fittings and olets due to lots of dyes readily available with our sub vendors. However, machining takes place in the house, followed by finishing and marking for traceability of the base material.


As pipe fittings OM Tubes is backed by all world class certifications including ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 & CE-PED 97/23/EC. We are also members of various renowned agencies and Chambers of Commerce including MASSMA, EEPC, FICCI, FIEO, Indian Merchants Chamber etc. We provide a 1 year product replacement warranty for all pipe fittings exported from our company. We guarantee the quality because 100% pipe fittings manufactured are checked in house for defects in quality and workmanship. Our quality program is a 3 layered independent department check for various factors, including Dimensional Check, Visual Inspection, and Finishing, Burr level, Leakage Test, Pressure Rating test, Chemical inspection and Mechanical properties verification. We are running at full capacity and sometimes outsource our job due to increased work load.Our intelligent procurement module places a lot of emphasis on selection of raw material. As much as possible, we try to procure Japanese and European origin raw material domestically or from the international markets. Secondary preference is given to Indian and Chinese origin raw material from good quality mills.


Our Pipe Fittings carry our brand identity with a special brand marked on the fittings. Our brand i-Fit is branded on all pipe fittings exported from our company. i-Fit is a registered brand owned by OM Tubes which stand for intelligent fitting connections we provide for international markets. Use of intelligent technology modules is used for providing a seamless buying experience for high quality i-Fit pipefittings.Pipe fittings manufactured are marked with the standard format of i-FIT-Size-Material-Heat Number. This heat number is 100% traceable to our records and we maintain very strict watch to ensure the authenticity of our brand isn’t duplicated by other brands.


OM Tubes pipe fitting are packed in special and branded carton boxes and crate boxes depending on the mode of transport. Fittings are wrapped with special thin plastic and beveled ends are protected with plastic caps. They are then packed in the carton or wooden boxes. Socket weld fittings are also protected by the caps for protection to the ends and the threads where applicable. It is important that the damages in transit are avoided and pipe fittings reach customers in the same form as it is manufactured. Thus we place lots of emphasis on packing and packaging of the goods.Pipe fitting carry various export documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates.Each heat and lot of tube fittings are supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the pipe fitting along with pressure rating. We also confirm the guarantee of the fittings supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by customer at an extra cost.Free samples in Stainless steel and carbon steel can be provided upon request to gauge quality and finishing of our fittings against confirmed receipt of purchase order. We can also send photos upon request.


Fastest Delivery in the world.

At OM Tubes we target just one thing, the fastest seamless buying experience for our customers.

Weather small order or big order, we place a lot of emphasis on intelligent procurement modules. Real time inventory is maintained of all the available sizes in house and in the market; so much time is spend on the manufacturing process and less on sourcing the raw material. Standard sizes are available in ready stock in Stainless Steel and Carbon Steel in our replenishing inventory system. All special grades are made to order. We undertake export orders irrespective of small or big quantities. We are the preferred choice of brand for urgent delivery and shut down projects due to our impeccable delivery system module. Added we have excellent storage and warehouse tracking facilities for quick dispatches and real time stock tracking.

Thus we are the perfect choice for requirement of tube fittings manufactured with world class quality and required on urgent delivery basis.

Head Office: Plot no. 10, Bordi Bunglow, 1st Panjarapole Lane, CP Tank, Mumbai - 400004

Corporate Office: 307, 457, Phoenix Building, Near Prarthana Samaj, S V P Road, Charni Road East, Mumbai - 400004

Factory Address: Plot No.15/2, Swastik Indl. Estate, In KT-2 Park, Village Waliv, Vasai (East), Dist. Thane - 401208

Previous Next
Test Caption
Test Description goes like this